Intrinsic safety oxygen transmitter
Safety Oxygen Transmitter
  ■ Proprietary Electrolyte Formulation and Anode Material

  ■ Electro-etched Smooth Cathode
  ■ Recovery From Air to 10 PPM in under 40 Minutes
  ■ Extended Operating Temperature Range -10°C (-4°F)
  ■ Z-Series sensor Compatibility with 0-100% CO2
  ■ Fast Sensor Response, no Routine Sensor Maintenance Needed
Key Features
   ■ User Selectable Range From 0-5 PPM to 25%
   ■ Output Locking on Selected Range
   ■ 4-20 mA or 1-5 VDC
   ■ Fine Tuned Temperature Compensation
   ■ Barometric Pressure Compensation
   ■ Intrinsic Safety Compliance, use Safety Barrier
   ■ 18-24 VDC Loop Powered

Technical Specifications

Measurement Range
User selectable from 0-5ppm - 21%(Blue Type)
User selectable from 0.5-25%(Red Type)
Display
Bright 2-Line LED
Output Lock
4-20 mA locked on user selectable range
Accuracy
< 2% of FS at constant operating conditions
Linearity
+/-1% after calibration
Temperature Compensation
Fine tune on low PPM and % range for enhanced stability
Barometric Pressure Compensation            
Optional
Calibration Method
Certified Span Gas or air, Recommended Calibration interval 30 days
Gas Connections
1/8" compression tube fittings or 1/8” female NPT
Menu Controls
Membrane Switch, Menu driven selection of Analysis Range, Display Resolution, signal Filter Strength, Fine Tune Temp Compensation, System Functions
Response Time
90% of Step Change in <30 sec
Repeatability
+/-1% over all ranges
Recommended Sample Flow Rate   
1-2 SCFH, vent to atmosphere
Sample System Included
SS 316 Sensor Housing with Compressing Tube Fittings Gas Connectors
Sensor Model
PP333 / PC32-4 inert gases, PP333X / PC24X-4 for gases containing more than 0.5% CO2     
Expected Sensor Life
124 months @ 25ºC and 1 atm
Operating Temp
Range: 5ºC to 45ºC
Enclosure
IP67 Painted Aluminum 7.3” x 5.3” x 3.4”
Warranty
12 months transmitter; 12 months sensor
Approval
Ex ia IIC T4 Ga, Tamb -20° to +60°C
Read more